Arai MX-V EVO Flame White ON ORDER

The latest aerospace fibres, with 30% more strength in extension & bending resistance than standard fiberglass comprises the majority of the SCLC shell. While considerably more expensive than most fiberglass (and in fact more than many Carbon Fibre materials), this “Super Fibre” provides incredible flexibility and strength, which maximizes shell integrity.

• Ventilation
  

Easy to clean diffusers create a strong venture vacuum at the rear. Centre top vent for increased airflow. Under-peak air intake collects and directs cool air into the helmet. Inner chin vent shutter prevents debris coming into the helmet in dusty riding conditions. Goggle ventilation and lower side vents.

The FRONT Top Vent provides 11% more airflow than the previous Vent. The Front chin vent can easily be removed for cleaning. The Top Vent has three positions; closed, half open and fully open. Open and close the CHIN BAR vents from the inside to prevent debris coming into the helmet in dusty riding conditions.

The REMOVABLE three-piece rear exhaust creates a tremendous amount of venturi vacuum at the rear. Can be easily removed for cleaning or replacement. SIDE EXHAUSTS produce low pressure behind the rear vent for better hot air extraction.

• Dry-Cool® Liner

Arai´s Dry-Cool® material transfers heat plus moisture away from the rider quickly and efficiently.

•  Replaceable Interior

All parts can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

• 5mm ’’Peel Away’’ Ear cups/Cheek pads

Giving even more ability to craft the perfect fit and comfort, the cheek pads feature a 5 mm peel away layer for added room if needed.

• 5mm ’’Peel Away’’ Temple pad

Arai´s peel-away temple crown pads give the option of 5 mm more interior width if needed.

• Facial Contour System FCS®
  

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System FCS® works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

• Emergency Release System (ERS)

Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.

• Breath Guard & Goggle Strap Guide:

The Breath Guard will direct hot breath down and away. The Google Strap Guide keeps the goggle strap in position even during intense or competitive riding.

ARAI KEY FEATURES:

• Handmade: It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.
  

• Glancing Off: To minimize impact energy getting into the helmet, it’s crucial that a helmet can slide over a surface. Arai believes that a Strong, Round & Smooth shell helps to increase a helmets ability to protect the rider during an impact.
  

• Smooth shape, better protection (R75 Concept): The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact.
  

• Five times inspected: Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.
  
• All-day comfort: All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.
  
• Arai In-house test & Penetration tested: All Arai helmets are penetration tested, although not required by European helmet standards. Designed to meet the stringent Arai In-house criteria, in addition to the mandatory ECE 22-06 standard.
  
• Double-D ring device: The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.
  
• 5-year limited warranty: All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.
  
• 3 Shell Sizes: XS-S/ M-L/XL-XXL
  
• ECE22.06 Approved.