RX-7V EVO Samurai

• Ventilation
  

The combined systems offer excellent and efficient ventilation. The centre duct providing 11% more airflow that it's predecessor. The Air Channel guides air from the eye port area to the side ducts. The Free Flow System (FFS) creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. The Eyeport Airchannel enhances air exhaust from the eye port area.

The FRONT Top Vent Intake & the Diffuser System provide abundant airflow. Both adjustable on 3 position to minimise wind noise and water intrusion. The Brow vents & Three Position Chin Vent work together to channel fresh, cool air to the rider.

At the REAR:  the Neck Exhaust Vent enhances hot-air extraction from the interior. REAR Side Exhausts: are integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed.

• Aerodynamics: Pull Down Chin Spoiler & Patented Air Wing®
  

The Pull Down Chin Spoiler helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck.

The Patented Air Wing® is MotoGP tested and designed to greatly reduce drag, turbulence and buffeting resulting in more comfort and additional top-speed.

•  Shield Latch System

Borrowed from our F1 helmet, it secures the shield like never before but operates smoothly and intuitively.

• Antimicrobial Liner material

Helps maintain neutral acidity levels close to human skin and antibacterial consumption. With the aim of a softer, deeper and even more comfortable fit we developed a softer liner frame material.

•  Replaceable Interior

The complete interior may be easily removed. All parts can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

• Speaker pockets

The speaker pockets, offering room for mounting speakers without effecting comfort or fit (Speaker not included).

• 5mm ’’Peel Away’’ Ear cups/Cheek pads

Giving even more ability to craft the perfect fit and comfort, the cheek pads feature a 5 mm peel away layer for added room if needed.

• 5mm ’’Peel Away’’ Temple pad

Arai´s peel-away temple crown pads give the option of 5 mm more interior width if needed.

• Facial Contour System FCS®
  

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System FCS® works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

• Emergency Release System (ERS)

Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.

•  Chin Curtain (Removable)
  

The Removable Chin Curtain simultaneously blocks air intrusion from turbulent air below and reduces noise even further.

ARAI KEY FEATURES:

• Handmade: It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.
  

• Glancing Off: To minimize impact energy getting into the helmet, it’s crucial that a helmet can slide over a surface. Arai believes that a Strong, Round & Smooth shell helps to increase a helmets ability to protect the rider during an impact.
  

• Smooth shape, better protection (R75 Concept): The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact.
  

• Five times inspected: Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.
  
• All-day comfort: All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.
  
• Arai In-house test & Penetration tested: All Arai helmets are penetration tested, although not required by European helmet standards. Designed to meet the stringent Arai In-house criteria, in addition to the mandatory ECE 22-06 standard.
  
• Double-D ring device: The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.
  
• 5-year limited warranty: All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.
  
• 7 Shell Sizes: XS/S/ M/L/XL/XXL/XXXL
  
• FREE Pinlock Included: Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily.
  
• ECE22.06 Approved.